Is this right for your vehicle?
✅ 2024+ Jeep Wrangler JL / 4xe — you're in the right place
➡️ Gladiator 2024+ — front roll bars only — see GP-Grip AIR for Gladiator
➡️ 2007–2023 Wrangler — see GP-Grip PRO
❌ Sky One-Touch Power Top (SOT) — not compatible with SOT installed
❌ Ford Bronco — not compatible; see the GP Back Grip PRO headrest handles
Jeep's 2024+ Wrangler redesign put side-curtain airbags in the roll bar, under a plastic cover. There is no roll bar padding on these bars. That's a genuinely good safety upgrade — but it also means the grab handles that worked on a 2020 JL won't work on yours. Most aftermarket handles either block the airbag path or were never designed with it in mind. The GP-Grip AIR was built specifically around this with a patented 4-point strap system. The top 2 straps loop on D-rings that take the 2 top factory screws, and the 2 bottom straps bolt under the roll bar with factory screws. The straps sit on the outside, metal side of the roll bar, clear of the side-curtain airbag deployment path on the inside. Rock-solid, non-swinging grip without touching your Jeep's safety system.
If you've been white-knuckling the door frame on trail rides, steadying passengers after a mud run, or just want your 2024 Wrangler to feel more purpose-built — this is the handle.
Which pack do you need?
2 Front Roll bar — driver and passenger front roll bar positions. Best starting point.
4 Front & Back — all four roll bar positions, front and rear.
2 Front + 2 Headrest — front roll bar handles plus headrest handles for rear-seat passengers.
4 Front & Back + 2 Headrest — the full setup: every roll bar position and headrest handles.
2 Back Roll bar — rear roll bar positions only.
4 Front & Back + 2 Headrest + Cargo Tiedown + Tag — 4 GP-Grip AIR (front and back roll bars), 2 headrest handles, 6 anchors, 6 D-plates and a red tag.
Airbag-safe — not just airbag-compatible
A lot of handles say "airbag-compatible" and mean it loosely. On the GP-Grip AIR, the straps stay on the outside, metal side of the roll bar, clear of the side-curtain airbag deployment path on the inside. That's not just a label, that's the whole engineering brief.
Built for the trail, not just the parking lot
6061 aero-grade aluminum handle. Double-layered heavy-duty polyester straps with a 4-ring load distribution mount that eliminates the wobble you get from single-point attachments. 250 lb static load rating. The grip padding is reversible — sleek aluminum side out for the street, cushioned side out when you're crawling rocks. No rattle, no spin, no loosening after a season on the trail.
About 5 minutes per handle, no drilling
A Torx screwdriver is required: the AIR mounts with your Jeep's factory screws, so there are no new holes and it comes off as clean as it went on. The hardtop and freedom panels can stay on if you use a screwdriver extension for the Torx bit; without one, removing the freedom panels makes the factory screws easier to reach. Not compatible with the Sky One-Touch Power Top while it's installed.
13 colors in 6061 aero-grade aluminum
Black, Silver, Blue, Army Green, Neon Green, Orange, Picket Gray, Pink, Red, Metallic Gray, White, Yellow, Purple. Match your tow hooks, go full contrast, or just pick the one that's been living in the back of your head.
No more swinging
Airbag-Compatible Design for Safety: The GP-Grip AIR features a patented design that ensures compatibility with side-curtain airbags in the 2024+ Jeep Wrangler JL and 4xe. This allows for a secure, no-swing grip without compromising the safety features of your Jeep. The design includes reversible, removable handle padding, so you can choose between a sleek aluminum look or a cushioned grip.
Enhanced Jeep Experience: Made from aero-grade aluminum for comfort and style, the GP-Grip AIR gives your 2024+ Wrangler (2-door and 4-door) a steady, secure grip that improves both the look and the function of your interior.
Built Tough for Adventure Seekers: 250 lb workload capacity per handle. Its solid metal 4-ring mount and double-layered straps give a firm, non-wobbling hold on the bumpiest roads.
Personalize Your Jeep: The one-size-fits-all handle gives a comfortable grip for every rider.
Strap placement
Instruction manual and more FAQ: GP-Grip AIR install guide
ADDITIONAL INFORMATION
Fitment: 2024+ Jeep Wrangler JL / 4xe (2-door and 4-door) — airbag-equipped roll bar, front and rear
Not compatible: Sky One-Touch Power Top (SOT) | 2007–2023 Wranglers (use GP-Grip PRO) | Gladiator rear roll bar positions | Ford Bronco
Installation time: about 5 minutes per handle | Tools: Torx screwdriver | Difficulty: Easy | No drilling required
Warranty: Lifetime warranty on hardware; 1-year on fabric parts.
Related: GP-Grip Parts & Add-ons (2024+ AIR mount kit) · GP Back Grip PRO (mounts on the headrest, not the roll bar)
Great product and easy to install.
Quality, appearance, ease of installation, all better than expected. Goes great with other orange accents on my Mojave X, very pleased with product!
great shipping.. easy install... very sturdy... great product.
This are the best alternative to the mopar brand. I'm rating them high only because they work, BUT, the directions suck! Youtube before you try to install.
I have a 2024 model and I doubted if it will block the airbag or hit the window, but it's NOT. I took sometime to read the manual and watch their video to install, but as long as the ring side of the strap are mounted under the roll bar, it's all good. Nice and solid aluminum handles, solid grip and comfortable, great for my offroad trip with kids, plus they look so much better than the plastic or paracord handles Pretty happy about the GPCA handles
1. Gives a great handle to hold while riding. Handle is comfortable, steady, and made with quality pieces. 2. We all know the seats on our JL’s start to droop from sliding out of the seat. This solves a lot of that problem getting out. 3. Bonus. They look nice! Just FYI, the blue color matches the 4xe accents perfectly. So blue will work with any 4xe!! It looks great on my anvil Jeep.
Fits 2025 Jeep Wrangler JL 2 door. Easy to install. Just watch the video. Seems very sturdy just pulling on it hard. Does not block airbag.
Why this isn’t something stock I don’t understand. I’ve been needing something here since I bought my jeep to hold on to while I drive instead of the roll cage. These work perfect for my 2024 Wrangler in Hydro Blue. If I had to knock it at all I would say it’s not an exact color match even though it was called hydro blue. That may be just due to the flat color of it compared to the metallic of the paint of the jeep itself. I did have to get a little used to how I get in the jeep because even though it “folds flat” it still sticks down a little bit. Instillation was straight forward but let me tell you that taking off the freedom panel will make things 10x easier for you than installing it leaving the panels on. Instructions tell you that they don’t need removed but maneuvering the top fastener points in place was too much of a pain for me. I absolutely love the design of these as I hate how the typical bungee cord looking ones look. I’d definitely recommend these just make sure you have a 2024 or newer and you’re good to go!
Love these! Installation was a little tricky in terms of ensuring I got the labels facing the right way but if you bring them out with you the visuals help. I agree the pads do suck. I am just not going to use them since they are flimsy. That said though they look good and work well. Love the way they look.
I am really impressed with the quality, and everything functions and fits just as advertised. Thank you, everyone!
Fits perfect on my hardtop molle panel
This fit my 2024 Chevrolet Colorado Z71. The hard part of the install was the truck itself.When sitting in the back Seat at approximately the 11 o'clock position you will see a metal hoop below the black sleeve, there is one on each leg of the headrest. They do not have to be removed but do need pryed slightly to disengage the 'lock'. Its tricky because if not careful the other side wants to slide back down and lock again..This should fit 2023 Chevrolet Colorado, 2023 GMC Canyon, 2024 Chevrolet Colorado, 2024 GMC Canyon, 3rd gen
great shipping.. easy install... very sturdy... great product.
1. Gives a great handle to hold while riding. Handle is comfortable, steady, and made with quality pieces.2. We all know the seats on our JL’s start to droop from sliding out of the seat. This solves a lot of that problem getting out.3. Bonus. They look nice! Just FYI, the blue color matches the 4xe accents perfectly. So blue will work with any 4xe!! It looks great on my anvil Jeep.
Good quality and works well. Easy to install and fits nicely behind head rest. Looks a little weird there but helps getting up into the car easier
I have been waiting for Grab Handles for the 2024 JL. I think these are very well built and the installation was easy. They seem to be well made and the way they attach seems to hold a lot of weight as you get in.My only gripe is the Velcro wrap that goes around the handle where your hand grabs. There just doesn\'t seem to have been a lot of thought on this. The handle itself is thin and there isn\'t a lot of padding with the supplied wrap. And, the wrap is quite a bit larger than the metal handle so it spins around and just isn\'t a good fit. Perhaps if the bottom of the handle was dipped in rubber or a different wrap. I like the woven handles that I had on my other Jeeps (liked the feel of them - I feel these new handles are altogether better).I do recommend them for purchase if you have side air bags.
I have been waiting for Grab Handles for the 2024 JL. I think these are very well built and the installation was easy. They seem to be well made and the way they attach seems to hold a lot of weight as you get in.My only gripe is the Velcro wrap that goes around the handle where your hand grabs. There just doesn't seem to have been a lot of thought on this. The handle itself is thin and there isn't a lot of padding with the supplied wrap. And, the wrap is quite a bit larger than the metal handle so it spins around and just isn't a good fit. Perhaps if the bottom of the handle was dipped in rubber or a different wrap. I like the woven handles that I had on my other Jeeps (liked the feel of them - I feel these new handles are altogether better).I do recommend them for purchase if you have side air bags.
This are the best alternative to the mopar brand. I'm rating them high only because they work, BUT, the directions suck! Youtube before you try to install.
I have a 2024 model and I doubted if it will block the airbag or hit the window, but it's NOT.I took sometime to read the manual and watch their video to install, but as long as the ring side of the strap are mounted under the roll bar, it's all good.Nice and solid aluminum handles, solid grip and comfortable, great for my offroad trip with kids, plus they look so much better than the plastic or paracord handlesPretty happy about the GPCA handles
Work perfect on my 2021 chevy colorado just take me around 5 minutes aprox.
I know this is marketed for Jeep, but I got these for my Ram. I started doing Uber part time and some people have a hard time getting in the back. I saw these and thought they would work well in assisting them in.
-
Charles | Operation
Installation was just as quick and easy as advertised. They are an ingeniously designed and well manufactured product that provides a quality solution to roll-bar hand grips in the 2024 Wrangler with side airbags. I especially like that I could color match the metal handle to my Jeep! And on top of it all they are a reasonably priced. Highly recommended!!
-
Randy | Trainer
Installation was easy. Very helpful specially for my wife. Durability is great. Would definitely recommend this product for others.
-
Ed | Travel Blogger
These look very professional and are very sturdy. I am 200 lbs. and I can hang on these with no movement or give.
