GPCA Utility Case — GP-Grip PRO Compatible
GPCA Utility Case — GP-Grip PRO Compatible
Couldn't load pickup availability
Mounts to: the GP-Grip PRO utility mount, a GP-Back-Grip, a belt up to 2" wide, a bag or a MOLLE panel. GP-Grip not included.
The GPCA™ Utility Case is a rugged, zippered EDC case for the gear you don't want rolling under the seat. Mount it on your GP-Grip or GP-Back-Grip, clip it to your MOLLE gear, wear it on your belt, or stash it in your daily-carry backpack or overlanding setup, and keep your sunglasses, pen, carabiner, flashlight and small tools in one place.
Features
- 600D ballistic polyester — durable and easy to clean
- Collapsible U-shaped inner panel — extra protection for sunglasses and other fragile EDC items
- Soft liner — gentle on the things you carry inside
- Extra-sized engineered-ABS carabiner — included; easy on and off a belt loop, backpack or messenger bag, and holds keys or a pocket chain
- Anchor-style zipper pull — easy to grab whenever you need your gear
- Crossed-strap design — fits any MOLLE strap/slot system and belts up to 2" wide
- Water-resistant zipper

Product Specs
| Material | 600D ballistic polyester, zippered |
|---|---|
| Inner structure | Collapsible U-shaped inner panel + soft liner |
| Outside size | About 7.5 × 4 in |
| Storage inside | About 2 × 2.75 × 6.5 in (4.75 in short side) |
| Fits inside | Sunglasses, GP-1945 Bolt-Action Pen, Carabiner PRO, small flashlights, small tools |
| Zipper | Water-resistant, anchor-style pull |
| Carabiner | Extra-sized engineered ABS, included |
| Mounts to | GP-Grip PRO utility mount, GP-Back-Grip, belts up to 2", bags, MOLLE |
| Also sold as | GP-Grip Glasses Case (GP-Grip Parts & Add-ons) |
| In the box | Utility Case + ABS carabiner (GP-Grip handle not included) |
Frequently asked questions
What is it made of?
Durable, easy-to-clean 600D ballistic polyester with a zipper. Inside, a collapsible U-shaped inner panel adds protection and a soft liner is gentle on what you carry. It is a soft pouch, not a hard-shell case.
How big is it?
About 7.5 × 4 inches outside. The storage space inside is about 2 × 2.75 × 6.5 inches (4.75 inches on the short side).
What fits inside?
Sunglasses, a GP-1945 Bolt-Action Pen, a Carabiner PRO, small flashlights and small tools.
Where can I mount it?
On the GP-Grip PRO utility mount, a GP-Back-Grip, a belt up to 2 inches wide, a bag or any MOLLE strap/slot system. The included ABS carabiner clips it to a belt loop, backpack or messenger bag.
Is it the same as the GP-Grip Glasses Case?
Yes. The GP-Grip Glasses Case on our GP-Grip Parts & Add-ons page is this same Utility Case.
Is a GP-Grip included?
No. The GP-Grip handle is sold separately; see the GP-Grip handles.
Related: GP-Grip PRO · GP-Back-Grip PRO · GP-1945 Bolt-Action Pen · Carabiner PRO · GP-Grip parts & add-ons
Share













- 5 stars: 339 (80%)
- 4 stars: 61 (14%)
- 3 stars: 10 (2%)
- 2 stars: 5 (1%)
- 1 star: 10 (2%)
Quality, appearance, ease of installation, all better than expected. Goes great with other orange accents on my Mojave X, very pleased with product!
This are the best alternative to the mopar brand. I'm rating them high only because they work, BUT, the directions suck! Youtube before you try to install.
I have a 2024 model and I doubted if it will block the airbag or hit the window, but it's NOT. I took sometime to read the manual and watch their video to install, but as long as the ring side of the strap are mounted under the roll bar, it's all good. Nice and solid aluminum handles, solid grip and comfortable, great for my offroad trip with kids, plus they look so much better than the plastic or paracord handles Pretty happy about the GPCA handles
1. Gives a great handle to hold while riding. Handle is comfortable, steady, and made with quality pieces. 2. We all know the seats on our JL’s start to droop from sliding out of the seat. This solves a lot of that problem getting out. 3. Bonus. They look nice! Just FYI, the blue color matches the 4xe accents perfectly. So blue will work with any 4xe!! It looks great on my anvil Jeep.
Fits 2025 Jeep Wrangler JL 2 door. Easy to install. Just watch the video. Seems very sturdy just pulling on it hard. Does not block airbag.
Why this isn’t something stock I don’t understand. I’ve been needing something here since I bought my jeep to hold on to while I drive instead of the roll cage. These work perfect for my 2024 Wrangler in Hydro Blue. If I had to knock it at all I would say it’s not an exact color match even though it was called hydro blue. That may be just due to the flat color of it compared to the metallic of the paint of the jeep itself. I did have to get a little used to how I get in the jeep because even though it “folds flat” it still sticks down a little bit. Instillation was straight forward but let me tell you that taking off the freedom panel will make things 10x easier for you than installing it leaving the panels on. Instructions tell you that they don’t need removed but maneuvering the top fastener points in place was too much of a pain for me. I absolutely love the design of these as I hate how the typical bungee cord looking ones look. I’d definitely recommend these just make sure you have a 2024 or newer and you’re good to go!
Love these! Installation was a little tricky in terms of ensuring I got the labels facing the right way but if you bring them out with you the visuals help. I agree the pads do suck. I am just not going to use them since they are flimsy. That said though they look good and work well. Love the way they look.
I am really impressed with the quality, and everything functions and fits just as advertised. Thank you, everyone!
This fit my 2024 Chevrolet Colorado Z71. The hard part of the install was the truck itself.When sitting in the back Seat at approximately the 11 o'clock position you will see a metal hoop below the black sleeve, there is one on each leg of the headrest. They do not have to be removed but do need pryed slightly to disengage the 'lock'. Its tricky because if not careful the other side wants to slide back down and lock again..This should fit 2023 Chevrolet Colorado, 2023 GMC Canyon, 2024 Chevrolet Colorado, 2024 GMC Canyon, 3rd gen
1. Gives a great handle to hold while riding. Handle is comfortable, steady, and made with quality pieces.2. We all know the seats on our JL’s start to droop from sliding out of the seat. This solves a lot of that problem getting out.3. Bonus. They look nice! Just FYI, the blue color matches the 4xe accents perfectly. So blue will work with any 4xe!! It looks great on my anvil Jeep.
Good quality and works well. Easy to install and fits nicely behind head rest. Looks a little weird there but helps getting up into the car easier
I have been waiting for Grab Handles for the 2024 JL. I think these are very well built and the installation was easy. They seem to be well made and the way they attach seems to hold a lot of weight as you get in.My only gripe is the Velcro wrap that goes around the handle where your hand grabs. There just doesn\'t seem to have been a lot of thought on this. The handle itself is thin and there isn\'t a lot of padding with the supplied wrap. And, the wrap is quite a bit larger than the metal handle so it spins around and just isn\'t a good fit. Perhaps if the bottom of the handle was dipped in rubber or a different wrap. I like the woven handles that I had on my other Jeeps (liked the feel of them - I feel these new handles are altogether better).I do recommend them for purchase if you have side air bags.
I have been waiting for Grab Handles for the 2024 JL. I think these are very well built and the installation was easy. They seem to be well made and the way they attach seems to hold a lot of weight as you get in.My only gripe is the Velcro wrap that goes around the handle where your hand grabs. There just doesn't seem to have been a lot of thought on this. The handle itself is thin and there isn't a lot of padding with the supplied wrap. And, the wrap is quite a bit larger than the metal handle so it spins around and just isn't a good fit. Perhaps if the bottom of the handle was dipped in rubber or a different wrap. I like the woven handles that I had on my other Jeeps (liked the feel of them - I feel these new handles are altogether better).I do recommend them for purchase if you have side air bags.
This are the best alternative to the mopar brand. I'm rating them high only because they work, BUT, the directions suck! Youtube before you try to install.
I have a 2024 model and I doubted if it will block the airbag or hit the window, but it's NOT.I took sometime to read the manual and watch their video to install, but as long as the ring side of the strap are mounted under the roll bar, it's all good.Nice and solid aluminum handles, solid grip and comfortable, great for my offroad trip with kids, plus they look so much better than the plastic or paracord handlesPretty happy about the GPCA handles
What Customers Say
-
Chris
I just opened up my order tonight and everything was great. Incredible build quality and design as usual!
-
William
Five Stars all the way. These are truly next level. The quality and construction are outstanding in the segment.
-
Michele
Thanks so much and definitely looking forward to these. Father's day gift for my husband!
Collections
-
All Vehicle Gear
GPCA makes gear for every vehicle — not just Jeeps. This collection...
-
Everyday Carry (EDC) Gear — Carabiners, Pens & Tools
GPCA™ everyday carry gear is built for people who use their tools...
-
GPCA Bestsellers — Top-Rated Automotive & EDC Gear
These are the GPCA™ products customers order most. If you're new to...